9
Moving your wine chiller
●
Remove all items (bottles)
●
Tape down securely all loose items (shelves) inside your appliance.
●
Turn the adjustable leg up to the base to avoid damage.
●
Tape the door shut. Be sure the appliance stays secure in the upright position during
transportation. If you absolutely need to transport the chiller horizontally, transport the chiller
on its back (door on top). Also protect outside of appliance with a blanket, or similar item.
Energy saving tips
The wine chiller should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
TROUBLESHOOTING GUIDE
You can solve many common wine chiller problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the
service.
PROBLEM
POSSIBLE CAUSE
Wine cooler does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Wine cooler is not cold enough.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The compressor turns on and off
frequently.
The room temperature is hotter than normal.
A lots of bottles has been added to the chiller.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work
Not plugged in.
The circuit breaker tripped or a blown fuse.
The light button is “OFF”.
Vibrations.
The chiller is not leveled
The bottles are vibrating.
There is an object under the chiller.
The chiller seems to make too much
noise.
The flow of refrigerant is normal
The circulation of the refrigeration
The chiller is not level.
The door will not close properly.
The chiller is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
