Step 5
1. Remove the
Bottom Rail [06]
and drill hole
into the floor where marked. Place
Wall Plugs
[01]
inside the holes.
2.lf needed, a rubber mallet can be used to
insert
Wall Plugs[0l].
3.To reduce risk of property damage, the use
of metal hammers is not recommended. If
needed, use drill to slightly enlarge the
opening of the hole.
IMPORTANT:
Wall Plugs[0l]
MUST be used.
Step 6
1. Replace the
Bottom Rail [06].
Tighten the
screws by the allen key.
3
Fig 5
3
Fig 6
9
