6. Place the completed frame on the shower base, threshold, or bathtub in its designated position. Carefully push the frame against the walls. Sometimes
the upper and lower wall opening measurements differ or the walls may not be plumb. To fix this problem, make slight adjustments by gently pulling the
Wall Profiles (04) out of the Glass Profiles (01) and use a leveler tool to adjust the vertically positioned frame.
7. This step will require an assistant to help hold the assembly in the proper position while drill holes are marked on the wall through the holes found on
the Wall Profiles (04) flange.
Carefully set the assembled unit to the side. Using a Ø 5/16” drill bit, drill the holes and insert the Wall Anchors (14). Add silicone caulk around the holes
in the wall, along the Wall Profiles, and under the bottom Guide Rail (02). Reposition the entire shower assembly back into its designated location and use
the Round Head Screws ST4x30 (14) to secure it to the walls.
U-STRIPS
