![background image](http://html1.mh-extra.com/html/anzzi/jetson-ft-az087/jetson-ft-az087_install-and-operation-manual_2949201011.webp)
11
Have questions? Call us at
1-844-44-ANZZI
or visit us at
www.ANZZI.com
OPERATING GUIDE
POWER THE BATHTUB
To turn on the system, press the power button, and the indicator light will come on.
Then press either the “Light” Button or “Air Pump” button to turn on the desired Function,
press again to turn off the function. (While the functions are active, the button will have
a red back light, when powered off it will have a white back light).
If no button is pressed for 10 seconds the control buttons will lock, and the “Power”
button will begin to flash. To unlock, press and hold the power button for 2 seconds,
until the button stops flashing. You can now activate the other buttons as desired.
Please note, the system will automatically power itself off after 60 minutes.
Press the “Power” button. If system is locked press and hold the “Power” button for 2
seconds, then press the power button again to turn off the system.
AIR BUBBLE MASSAGE SYSTEM
The Air pump should be used when the tub is filled. The Air pump will power off after
5 minutes if there is no water in the tub.
CHROMA-LIGHT
When powered on the light will cycle through all available colors.
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
BUBBLE MASSAGE
ON / OFF BUTTON
CHROMA-LIGHT
ON / OFF BUTTON
BATHTUB POWER
ON / OFF BUTTON
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)