Open water supply valve and check for any leaks.
Make sure the plug is plugged into the socket and the light is on. Press the “Test”
button: The plug light should be off. Press the “RESET” button: The light of the plug
should be on.
DO NOT USE IF “TEST & RESET” FAILS!
CALL TECHNICAL SUPPORT FOR MORE ASSISTANCE.
When the Electric Bidet Seat is powered ON, you will hear an audible beep.
When the cover is lifted a small amount of water will flow to pre-wet the inner
bowl.
After the user sits on the seat a small amount of water will flow to wash the
nozzle.
