QC-7610P Rev 1.0 Page 6
Installation
Initial Start Up
To prepare your
QC-7610P
for use, you need to:
1.
Unpack and install the equipment supplied.
2.
Open the Main Door of the machine.
3.
Plug the
QC-7610P
power cord into the internal three pin socket. Plug the other end into a
mains supply outlet. Use the P-clip supplied to strain relief the power cord.
4.
Plug your network cable into the RJ45 network socket.
5.
Switch the unit on using the Mains Switch on the Power Supply Front Panel
6.
Fit printer paper if not pre-loaded. (See section later in this manual)
7.
Reset the Long and Short term meters through the Configure System option in the
Configuration Menu accessed via the web interface. (See section later in this manual)
8.
At the machine load tokens and coins via the Refills option in the machine Attendant display
menu. (See section later in this manual)
