QC-7610P Rev 1.0 Page 18
Configure Card Values
Use the drop down menus in the Configure Card Values window to set the Credit Card Token payout
amount for each front panel button. These are initially called “Wash” as the default name but can be
renamed if necessary by using the Selection Name box to change the name.
To retrieve the settings for a particular button, set the drop-down Selection Number box to the desired
button number. Note the front panel button numbering as shown below.
Button number 4 must be set to a zero value if your configuration has this button set to be the Cancel
button.
Change any settings and then hit the Apply Changes button. The changes will be reflected in the Card
Transaction Value table.
The set transaction value is the value required to purchase the tokens exclusive of any credit card
surcharge that may be applied.
