2. If your device is thicker than 1”,
locate & remove thumbscrew by
turning counter clockwise.
3. Slide Retaining Strip forward & out
of the way. Strip can be removed.
4. Pulling forward, then up,
remove divider panel.
5. Adjust spacing as needed in
1/2” increments.
6. Slide retaining metal strip into place
& replace thumbscrew.
Device slots come set at 1” wide and are adjustable in 1/2” increments.
1. Using a ruler, measure the thickest
part of your device. If it is less than
1” thick, skip to next page.
Setting Up Your Devices (Front)
Specifications subject to change without notice
© 2017 Anywhere Cart | 42400 Winchester Rd Temecula, CA 92590 | 888-650-4488 | www.AnywhereCart.com
