ATSC 1KW TX Quick Start Guide
ACT-1000-QSG-DOC-V1.6, 9/12/2014
Page 16 of 23
9
Initial Turn On
Once the RF connections have been properly made into your antenna feed or
suitable station load, and the Transmitter has been properly wired to the station
electrical panel (as outlined in sections 6 & 8) you are now ready to turn on the
system.
Please locate and have handy for reference a copy of your
1KW TX Factory Test
Report
as well as the
1KW TX Quick Start Guide
, and
TX and Exciter User
Manuals.
Please follow the steps outlined below to safely turn on and bring your TX
system up to power.
1.
Apply power to the Transmitter by turning ON the AC Main Breaker
located in the lower left front of the TX and ensure that the AC Mains
indication is illuminated. You will hear the PA fans rev up to full speed for
a few seconds and then ramp down.
AC Mains LED ON
Turn Main Breaker ON
(Up position)
