AnyTone AT-3318UV, Instruction Manual

Page: 40 / 70

31
FUNCTION MENU SETUP(VERSION A)
12 TALKAR Talk Around
TX=RX
Turn on Talk Around function, current channel will
transmit at RX frequency, if CTCSS/DCS signaling
is set, it will interchange decoding CTCSS/DCS as
encoding.
OFF Close Talk Around function.
13 OFFSET
Offset Frequency
setup
0-70MHz
Note: It is available to setup in Programming software.
RX:UHF, TX:VHF or RX:VHF, TX:UHF
14 NAME
Editing Channel
name
a-Z, 0-9
In channel name display mode, will display the
edited channel name.
15 RPLOCK
Busy Channel
Lockout
BUSY
Carrier wave lock, transmitting is prohibited when
received matching carrier wave.
REPEAT
Signaling lock, transmitting is prohibited when
received matching carrier but with mismatching
CTCSS/DCS
OFF Close BCLO function
16 TX TX OFF ON/OFF TX function is enabled/disabled in current channel.
17 BAND VFO band limit ON/OFF Turn on/off band limit function
18 DSPSUB
Sub band display
setup
FREQ Display sub band frequency or channel
VOLT Display current battery voltage
OFF Sub band display is disabled
19 BEEP
Keypad Voice
prompt setup
ON/OFF Turn on/off keypad voice prompt function