AnyTone AT-3318UV, Instruction Manual

Page: 19 / 70

10
INSTALLATION & CONNECTION
Installing Optional Speaker / Microphone
Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
Note:The transceiver is less water resistant while using the
Speaker/Microphone.
Installing the Hand Strap
Slide the loop of the hand strap through the eyelet on
the upper rear of the transceiver, pull the entire hand
strap through the loop to secure the hand strap in place.
Installing / Removing the Belt Clip
■
Installing the Belt Clip:
Place the belt clip over the corresponding holes on the
back of the transceiver, and install supplied screws .