12
BASIC OPERATIONS
2. Enter the desired frequency by keypad.
In VFO or FM VFO mode, you can directly input frequency by keypad.
NOTE: The frequency input of main channel or FM radio is relevant to the stepping and transceiver
frequency range. If frequency setup is beyond range or not matching with step size, the input is unavailable.
Under the FM radio mode, the frequency step size input by numeric keys is 100k.
FM Channel Searching
When transceiver in FM radio mode, press
key, LCD displays " " icon, then
press
to start FM searching. When one station is sought, LCD displays current
station frequency, you can listen to current station.
Receiving
When your transceiver is called by other party, the LED light will be on and the arrow icon will flash, you
can hear the calling.
NOTE: You may not receive the calling when your transceiver is set at high squelch level. If current channel
is programmed with decode signal, only the same signaling call can be heard.
Transmitting
According to [MONI] key setup in programming software, hold [MONI] key to monitor the channel to
