Professional
FM Transceiver
18
ADVANCED OPERATIONS
full. When the battery level is “1” (6.1V), the LED will light red. The transceiver will voice prompt users
to charge the battery soon and will automatically disable TX.
Call 1/Call 2
Press the programmed key of "Call 1/Call 2" [PF1]/[PF2] to transmit the pre-stored selected DTMF
signaling.
Power Switch
Press the programmed key of ‘Power Switch’ [PF1]/[PF2], the transceiver will change the current
channel power and announce the new power setting.
Tone Pulse Frequency Selection
Press the programmed key of "TBST" [PF1]/[PF2], the transceiver will transmit the preset Tone pulse
frequency for 3 seconds. You can set the Tone pulse frequency to be one of 4 (1750HZ, 2100HZ,
1450HZ, or 1000HZ)
ON/OFF VOX
Press the programmed key of "VOX" [PF1]/[PF2], the transceiver will enable VOX and audibly confirm
that the VOX is turned on (only if you have allowed the function through the programming software).
When this function is enabled, the transmitting can be started by your voice (generally used with an
earpiece). When it is enabled there is no need to press the [PTT] key. Press the programmed key
again and the transceiver will respond audibly and confirm that have disabled the ‘VOX’ function.
NOTE: You need to first program the VOX function to be enabled (by your programming software);
otherwise, the above operation is invalid.
Summary of Contents for ANILE-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 18: ...Professional FM Transceiver 10 GETTING ACQUAINTED 1 2 3 9 4 6 5 7 8 10 12 11...
