Professional
FM Transceiver
15
BASIC OPERATIONS
Receiving
NOTE: You may not receive the call if your transceiver is set at a high squelch level. If the current
channel is programmed with a mandatory decode (RX) tone (CTCSS, DCS, etc), the selected tone also
must be present for the call to be heard.
Transmitting
Turn on/off Flashlight
Emergency Alarm
NOTE: When pressing and holding the PTT key, the radio will transmit (and will be indicated by the
red LED light). Release the [PTT] key to receive calls.
When your transceiver receives a transmission, the LED light will light up.
Before transmitting, make sure that the channel you want to use is not currently in use (by someone
that may be on a different "Tone" setup). Monitor the channel with the squelch off (according to how
you have the function keys setup). Once confirmed press the [PTT] key and talk into the microphone.
Keep the distance between your mouth and the microphone about 1-2 inches. Speak in your normal
voice (don't whisper and don't yell into the mic) for the best audio clarity.
When in standby, press Lamp (Flashlight) Key and transceiver will emit a beep and turn on the
flashlight, Repeat the procedure above to turn off the flashlight.
When in standby, press and hold LAMP key for 3 seconds, the transceiver will turn on the emergency
alarm. Power off the transceiver to exit the alarm.
Summary of Contents for ANILE-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 18: ...Professional FM Transceiver 10 GETTING ACQUAINTED 1 2 3 9 4 6 5 7 8 10 12 11...
