Manual Anytec 868 CAB
2017 (REV A)
Anytec Sweden AB
Magasinsgatan 7
903 27 UMEÅ
0770-220 210
- 7 -
We recommend raising the boat in August in order to wash down the bottom and remove any
fouling so as to maintain the performance of your boat. Your boat may lose up to 10% of its
normal performance in terms of speed, which also means an increase in fuel consumption.
O- Always consider the environment
.
V
–
Regular checkups
Anytec recommends that you at least once a month go through below points, make a habit to
lift the engine hood/cover regularly. It only takes a few minutes but can give you some nice
extra days at sea.
Fuel lines and their connections
Hydraulic lines with connections
Batteries, water level & lugs
Oil levels engine/gearbox
Safety equipment
Bilge Pumps
Steering control
1.9 Winter layup
For winter layup of engine, check the engine manual.
Wash your boat both inside and outside.
Remove all equipment, tools, etc. from your boat
Remove the battery, charge it and store it in a dry, ventilated area which is free from
frost (O), if the battery is left in the boat, remove the cables from the terminals.
Lubricate the control equipment (O).
Unscrew the boat’s drain plug (bottom plug)
Drain all water out of your boat and protect it from precipitation (O).
Always replace worn components (W) such as sacrificial anodes (also applicable to
the engine)
Remove cushions and other textiles that may turn mouldy.
Ensure that there is good ventilation
1.9.1 Trailer transport (W)
Check that the centre rollers are bearing the weight of the keel correctly, and adjust the side
supports so that they prevent all lateral movement. Do not forget to secure your boat using
tensioning belts. Do not load items / equipment into the boat when it is being transported on a
trailer.
https://www.boat-manuals.com/
