Please read all instructions. Save all warnings and instructions for future reference.
1. Handle with care and keep away from any heat source such as radiators, stoves, or
other appliances that produce heat
.
2. If the users disassemble or deliberately damage the inspection system, it will void
the warranty.
3. After every use power off and disconnect connection cables from the monitor and cable
reel.
4. Format the memory card during first use.
5. Do not power off when recording or can cause the memory to corrupt.
6. Charge battery to full capacity every time to have a longer lasting battery.
7. If system is idle for long period of time, charge the unit once a month to prevent
battery from degrading.
8. Only the camera probe and fiber optic cable are water resistant.
9. Turn off the unit when not in use and store in a dry place.
10. Always keep lens clean and dry, do not expose the inspection camera to any
moisture, gases or other material that may cause corrosion after every use.
11. Keep inspection system out of reach from children and do not allow anyone
unfamiliar with the system or these instructions to operate.
2.Specification
1.Notice
Monitor Display Size
Camera Sensor
Memory Card Max Support
Camera Resolution
Camera Diameter
Cable Length
LED Lights
Camera View Angle
Camera Material
Camera Waterproof Rating
Battery Capacity
Battery Work Time
Operating Temperature
7”
1/3 CMOS
32GB | (8GB included)
1000TVL
21mm * 120mm
30m / 100ft
12pcs
140 degrees
Stainless Steel
IP68
Lithium-ion | 12V 4500mAh
6-8 Hrs
-20-60 degrees
1
1.Connect all cables. Each wire on the connection cable is marked with "VIDEO", "LED
DC", "CAMERA DC" corresponding to "VIDEO", "LED DC", "CAMERA DC" on the side
of the power control box.
2.Connect camera head to cable camera port.
3.Switch “ON” from the side of the control unit and press power button on the monitor.