12.How to Operate Pushrod
1.Pull the cable: Hold the handle with your left hand. The cable needs to be extended
and hooked onto a hook on the handle and placed on top of the guardrail via the hook,
then pull cable with right hand to release the cable.
2.Wrap Cable: The cable needs to be placed onto the hook on the handle and placed
on top of the guardrail, hold the handle with your left hand and push the line in with your
right hand.
4.How to Turn on The Sewer Camera
1.Connect all cables. Each wire on the connection cable is marked with "VIDEO", "LED
DC", "CAMERA DC" corresponding to "VIDEO", "LED DC", "CAMERA DC" on the side
of the power control box.Install camera head, turn on the power battery control box and
screen power button, the system is starting up.
(
Please note: because the
coil is made of fiber optic
glass, do not bend less
than
90 degrees or else you will
break the glass and the cable
will not work properly.
(Improper use of the pushrod
will not be covered by the
warranty.)
1.
Press
“
MENU/EXIT button to enter menu, Press the "MENU/EXIT"
button to select the camera mode and choose the "Picture View" mode.
12
8.How to View Recorded Video.
1.Press “MENU/EXIT” to enter menu. Press "MENU/EXIT" to toggle to picture mode
and select "Picture View".