Anyload OCSM Series, User Manual

Page: 12 / 16

11
|
ANYLOAD OCSM Series Light Duty Crane Scale User’s Guide
Brightness / Backlight
Scale displays LED brightness / LCD backlight status.
o
Press or , and , change LED brightness / LCD backlight
status.
o
Press or , exit without saving. Press , exit and save.
Dim LED brightness or turn off LCD backlight saves battery power
dramatically.
LED brightness can be set to: 1(dim), 2(normal), 3(bright)
。
o
Press will enter Anti‐Motion
Anti‐Motion
Scale display Anti‐Motion level to be set, e.g., indicating
level 1.
o
Press or , and , change Anti‐Motion level.
o
Press or , exit without saving. Press , exit and save.
At the cost of measuring time, Anti‐Motion function intelligently settles
weight reading when scale is in motion. The weaker Anti‐Motion is, the
faster weight reading displays, but the longer it takes to be stable.
Anti‐Motion can be set to: 0 (off), 1 (weakest), 2 (weak), 3 (normal), 4
(strong), 5 (strongest).
o
Press will enter Auto‐Off again.
8. Battery Maintenance
To maximize battery life, observe the following battery maintenance
guides:
o
This scale is powered by a 6V rechargeable lead‐acid battery.
o
Battery is permanently attached to battery door. To remove battery
pack, remove both screws on the access door, pull battery pack
straight out, and unplug battery cable from scale.
o
Depending on LED brightness or LCD backlight setting, battery works
from 40 hours to 100 hours.
o
In order to conserve battery life, enable Auto‐Off and Idle Mode, dim
LED brightness or turn off LCD backlight.