ASP-500GA User Manual AnyDATA
74/161
[Note]
Ú
When the network mode icon at the bottom of the Today screen appears as
, enter the
PIN of RUIM.
Ú
When the network mode icon at the bottom of the Today screen appears as
, enter the
PIN of SIM.
3.
You can
change the PIN at any time by tapping
Change PIN
.
< Enter the current PIN > < Enter a new PIN > < Confirm the new PIN >
[Note]
Ú
Emergency calls don’t require a PIN.
How to assign a password to protect the device
1.
Tap
Start > Settings > Personal
tab
> Lock
.
2.
Select the
Prompt if device unused for
check box. You can specify the time the device can
remains idle before a password is required. You can also choose the password type in the
Password type
box.
For a better security, it is recommended to use an alphanumeric password if your device is
configured to connect to a network.
3.
On the
Hint
tab, you can enter a hint to remember the password, which will be displayed after
the incorrect password has been entered four times.
4.
Tap
ok
. You must enter your password next time when the device is turned on.
[Note]
Ú
Whenever the incorrect password is entered, the device response time gets longer until the
device appears to be not responding.
Ú
In case that you forget your password, clear the memory on the device following the
instructions in this user guide.
