10 (44)
5
Configuration
Anybus Wireless Bolt Serial should normally be configured via the web interface. Parameters can
be set individually or using one of the pre-configured
Easy Config
modes.
The web interface is accessed by pointing a web browser to the IP address of the Bolt Serial. The
default address is
192.168.0.99
. The computer accessing the web interface must be in the same
IP subnet as the Bolt Serial.
Fig. 5
Web interface
Advanced configuration can be carried out by issuing AT (modem) commands through the web
interface or over a Telnet or RAW TCP connection to port 8080. See the
AT Commands Reference
Guide
or the
Help
page in the web interface for more information.
Anybus
®
Wireless Bolt Serial
™
User Manual
SCM-1202-143 1.11 en-US
