Anybus CompactCom B40, Network Manual

Page: 19 / 56

CIP Objects 17 (54)
6.2 Identity Object (01h)
Object Description
The Identity Object provides identification of and general information about the module.
Instance attributes 1, 3, 4, 6 and 7 can be customized by implementing the Anybus Modbus command function
code 70.
Supported Services
Class: Get_Attribute_Single
Get_Attributes_All
Instance: Get_Attribute_Single
Set_Attribute_Single
Get_Attributes_All
Reset
Class Attributes
# Name Access Type Value
1 Revision Get UINT
0001h (Object revision)
2 Max instance Get UINT Maximum instance number
3 Number of
instances Get UINT Number of instances
Instance 01h Attributes
Attributes #1, 3, 4, 6 and 7 can be customized by implementing the Anybus Modbus command FC70.
# Name Access Type
Value/Description
1 Vendor ID Get UINT 005Ah (HMS Industrial Networks AB)
2 Device Type Get UINT 002Bh (Generic Device)
3
Product Code
Get UINT
0037h (Anybus CompactCom 40 EtherNet/IP)
4 Revision Get
Struct of:
USINT
USINT
Major and minor firmware revision
5 Status Get WORD
See Device Status table below
6
Serial Number
Get UDINT
Unique serial number (assigned by HMS)
7
Product Name
Get SHORT_STRING
“CompactCom 40 EtherNet/IP (TM)”
11 Active
language Set
Struct of:
USINT
USINT
USINT
Requests sent to this instance are forwarded to the module. If the request is
accepted, the module will update the language accordingly.
12 Supported
Language List Get Array of:
Struct of:
USINT
USINT
USINT
List of languages supported by the host application. The list is read from the
module and translated to CIP standard. By default the only supported language
is English. The application has to implement the corresponding attributes in the
application object to enable more languages.
Anybus ® CompactCom ™ B40 Modbus Serial EtherNet/IP Network Guide
SCM-1202-131 1.1 en-US