Configuration
12 (30)
LAN Setting
Label
Description
Obtain an IP address automatically
IP settings will be assigned automatically by the DHCP server in
your network.
Use the following IP address
Manually assign IP address, subnet mask, and default gateway.
Obtain DNS server address automatically
Obtain a DNS server address from the DHCP server.
Use the following DNS server addresses
Set a primary and secondary DNS server address.
Web Protocol
Select HTTP (default) or HTTPS protocol for web access.
Port
Specify a port to use for web access.
The default port is 80 for HTTP and 443 for HTTPS.
Web Access Control
Enable web access over the wired or wireless connections.
DHCP Server
When enabled, the device will act as DHCP server on your local
network.
Do not enable this function if there is an active DHCP server
on the network.
Start IP Address
The starting IP address of the IP range assigned by the DHCP
server.
Maximum Number of IPs
Limits the number of IP addresses allowed to access the device.
Lease Time (Hour)
The period of time that an IP address will be leased to a device.
4.2.3
Time Setting
Fig. 13
Time Setting
Time Setting
Label
Description
NTP
Enables or disables NTP function
NTP Server 1
The primary NTP server
NTP Server 2
The secondary NTP server
Time Zone
Select the time zone you are located in
Synchronize
Specify the scheduled time for synchronization
Local Date
Set a local date manually
Local Time
Set a local time manually
Get Current Date & Time from Browser
Click to set the time from your browser
Anybus
®
WLAN Access Point IP67 User Manual
SCM-1202-094-EN 1.0
