SANDWICH PRESS FLAT PLATE - TSA1009 /TSA1309 /
TSA9009 /TSA6009 /TSA1212
1. Before using the sandwich press, turn the control knob to 300°C
(570°F). Close the lid and allow the toaster to burn in for
±
30
minutes. You will notice smoke appearing due to the internal
protective mill-board burning in. This is normal.
2. After the 30 minute burning in time has elapsed, turn the sand
which press down to operating temperature of
±
250°C
(480°F) and grease plates generously with butter or oil. Never
allow excess fat or oil to build up as this will result in build–up of
carbon on the plates. This can be removed with a scraper or grill
brick.
SANDWICH PRESS FLAT PLATE NON-STICK - TSA2009 /
TSA3009 / TSA4009 /TSA5009
1. In the case of the coated plates, remove the label off the sur-
face and wash the plate with soapy water. Thereafter, rinse and
dry thoroughly. ‘Condition’ the surface with a thin coating of
cooking oil or fat. Then set the thermostat control knob to a
maximum of 240°C (464°F).
DUAL CONTROL SYSTEM – TSA4009 /TSA5009 /TSA6009
These models are provided with a rocker switch that allows the user
the option of switching on either both top and bottom plates or only
the bottom plate.
EXPLODED DIAGRAM
SANDWICH PRESS 12 SLICE
MODEL CODE: TSA1212 R01
SPECIFIC OPERATING INSTRUCTIONS