background image

SAFETY

READ ALL INSTRUCTIONS BEFORE USE. FAILURE TO       

FOLLOW THESE PRECAUTIONS COULD RESULT IN INJURY TO

YOURSELF AND OTHERS

1.   When this appliance is to be positioned in close proximity to 

      a wall, partitions, kitchen furniture, decorative finishes, etc. 

      it is recommended that they be made of non-combustible 

      material. If not, they shall be clad with a suitable 

      non-combustible heat insulating material,  and the closest 

      attention be paid to fire prevention regulations.

2.   Use the appliance on an individual 15A mains outlet only. 

      DO NOT OVERLOAD THE CIRCUIT. 

3.   These appliances are designed to operate on alternating current 

      only (A.C). 

DO NOT CONNECT TO DIRECT CURRENT (D.C)

4.   Ensure that the supply cord does not come into contact 

      with hot surfaces.

5.   If the supply cord is damaged, it must be replaced with a 

      new cord assemble available from the suppliers agent.

6.   Do not touch moving parts while operating the unit.

7.   Supervision is necessary when the appliance is used in 

      close proximity to children.

8.   Do not leave kettle lid down, when not in use, with the 

      heater on.

9.   Do not operate if equipment has been damaged or is 

      malfunctioning in any way.

10. Care should be taken in working with the hot oil in the kettle as  

      negligence on  behalf of the operator can cause serious injury. 
                                                                         

        

Part
No.

1

STIRRER MOTOR 

2

KETTLE RIGHT HINGE ASSY.

3

KETTLE LEFT HINGE ASSY.

4

POT LID MAGNET

5

STIRROR ARM ASSY. PMK0001

6

ALUMINIUM POT - PMK0001

7

SAFETY FUSE FOR KETTLE ( 298 C)

8

KETTLE ELEMENTS 1200W

9

SNAP ACTION THERMOSTAT KETTLE (220 C)

10 SS POT LID - PMK0001
11 OUTER KETTLE SHELL - PMK0001
12 SAFETY CUT OUT FOR INTERIOR HEATING 85°c
13 POPCORN MACHINE FRONT GLASS TEMPERED
14 ELEMENT FOR INTERIOR HEATING
15 RUBBER FOOT
16 SIDE GLASS TEMPERED 
17 KERNAL TRAY
18 INTERIOR BOTTOM PLATE
19 SERVING HATCH
20 POPCORN MACHINE  PERSPEX DOOR 353X215X4MM
21 DOOR HANDLE - PMK0001
22 FRONT DOOR HINGE 
23 WHITE LIGHT BULB FOR PMK0001
24 ROCKER SWITCHES
25 LIGHT BULB HOLDER FOR PMK0001
26 3 PIN CONNECTOR WITH  CONDUIT - PMK0001
27 PLASTIC CORNERS PMK0001
28 HOOD

Description 

MODEL:8oz POPCORN MACHINE

MODEL CODE : PMK0001R01

WARNING

Electric Shock Hazard

.

Keep water and other liquids from entering the inside 

of the equipment. Liquid inside the equipment could 

cause an electrical shock 

Do not spray water or cleaning products. Liquid could contact the           

electrical components and cause a short circuit or an electrical shock.        

Do not use equipment  if power cord is damaged or has been modified

3

8

MODEL: 8oz POPCORN MACHINE

MODEL CODE : PMK0001-1

Summary of Contents for POPCORN MACHINE 8oz









Reviews: