ASSEMBLY AND USE
Connector:
Use the connector (N) to attach the floor brush head (O) to the extension tube(s) (I) to
clean floor surfaces. It can also be used for the triangle fabric brush (R) for cleaning
surfaces such as upholstery. To connect the parts together, match the flat side of the
connector (N) tip to the rectangular bump in the extension tube (I) or triangle fabric
brush (R). Push the connector (N) all the way in and turn 180 degrees for a tight fit.
Extension Arm(s):
The extension arm(s) (I) can be inserted into the trigger handle (E). You can attach the
angle concentrator (Q), floor brush head (O), or the triangle fabric brush (R) to extend
your reach. To attach, press firmly on the purple button located on the trigger handle
(E) and insert into the hole at the end of the extension arm (I). To remove, press firmly
on purple button and pull out extension arm (I).
Floor Brush Head/Floor Cloth Pad:
Lay the floor cloth pad (P) on the ground. Lay floor brush head (O) down on top of pad.
Press firmly down on purple clamps located on the floor brush head (O) and insert ends
of cloth pad inside clamp.
o
180
4
