FUNCTION MODE
FUNCTION OPERATION
Press key cyclic selection.
TIMER mode operation
Controls the output according to the set time of ON and OFF.(Example : ON at 8:30 and OFF at 17:30 on Manday through Friday.)
PULSE mode operation
Output turns on for a fixed period(pulse width) at the set ON time.(Example : ON at 8:30, 12:00, 13:00 and 17:30 on Manday
through Friday. Pulse width 15 seconds.)
TWIN TIMER mode operation
Repeatedly turns ON and OFF during the period from the cyclic start time to the stop time. Independent ON and OFF time
setings are possible.(Example : ON time width 30 seconds and OFF time width 6 minutes.)
MEMORY option
Press key to select
memory or non-memory.
BACKLIGHT option
Press key to select
long backlight or short backlight.
SYMBOL
Long Backlight
Short Backlight
SYMBOL
FUNCTION
DESCRIPTION
Memory
Non-Memory
After reset clock and setting value will be restore to menufacture default
After reset setting value still exists, but clock vaule is reset
Backlight keep on (if no input power then backlight keep off)
Press any key backlight keep on 30 seconds
(if no input power then backlight keep off)
DESCRIPTION
FUNCTION
CONNECTION DIAGRAMS
Power failure
Program
Output
The timer retains clock operation
and program memory when
external power fail. With external
power failure, the contact
position will be held in OFF
position until the power is restored.
See right chart:
POWER BACKUP FEATURE
TRAI01
ON time of program1 in TIMER
mode, press key switch to
MO then press key to choose.
Repeatedly operating until FR.
HR
MIN
SEC
Press key or
key or
key setting time
to 08:30.
Press key switch to OFF time
of program1. Press key switch
to MO then press key to select.
Repeatedly operating until FR.
Press key or
key or
key setting time
to 17:30.
Press key
start program and
return to clock
status.
In PULSE mode, press
key set pulse
width to 15 sec. press
key switch to
ON time of program1.
HR
MIN
press key switch to MO then
press key to choose, repeatedly
operating until FR. Press key or
key setting time to 08:30, then
Press key switch to program2.
Setting weekly from
MO to FR. Setting
time to 12:00.
Press key
switch to program3.
Setting weekly from
MO to FR. Setting
time to 13:00. Press
key switch
to program4.
Setting weekly
from MO to FR.
Setting time to
17:30.
Press
key start
program and
return to
clock status.
Press
key setting
ON time to 30 seconds. press
key switch to OFF time.
SEC
Press key setting
OFF time to 6 minutes.
MIN
Press
key start TWIN timer of ON time
and begin count down.
In timing, press
key
again then
count down will be pause and
show S symbol on the LCD.
Kaohsiung Headquarter : No. 151, Jin Shan Road, Kaohsiung, Taiwan
Tel : +886 7 3595833 Fax : +886 7 359 5822
E-mail : [email protected] http://www.anv.com.tw
SOURCE
+0.5
-
0
45
+
0
.5
-
0
4
5
50
5
0
PROGRAM OVERLAPPING TIMEING CHART
HOLE SIZE
TF Series PID Temperature Controller
PRODUCT
Temperature Controller
PID Temperature Controller
Protective Relay
Solid State Relay
Timer
Counter
Level Switch
Power Relay
Thermocouple
Panel Meter
Accessories
Limit Switch
CLOCK
TWIN TIMER mode
MEMORY option
BACKLIGHT option
PULSE mode
TIMER mode
Pulse :
Pulse width
P1
P2
Out
ON
OFF
Note : P1=Program1 ; P2=Program2 ; Out=Output
Out
Timer :
P1
P2
