9
WARMER DRAWER
P/N 1010612 Rev. D 08/17
THERMOSTAT CONTROL REPLACEMENT
1. Turn off rocker switch (power on/off), unplug
the power cord and allow the unit to cool down
before proceeding.
2. Remove the drawer and water tray.
3. Remove thermostat element from tube clip on
inside of unit.
4. Carefully turn unit over and remove the base
plate (3).
5. Disconnect wires from thermostat control (9).
6. Remove knob (20) from front of control.
7. Reverse steps 2-6 to install replacement control.
HEATER ON LIGHT REPLACEMENT
1. Turn off rocker switch (power on/off), unplug
the power cord and allow the unit to cool down
before proceeding.
2. Remove the drawer and water tray.
3. Carefully turn unit over and remove the base
plate (3).
4. Disconnect wires and remove the indicator
light (13).
5. Reverse steps 2-4 to install replacement light.
ROCKER SWITCH (POWER ON/OFF) REPLACE-
MENT
1. Turn off rocker switch (power on/off), unplug the
power cord and allow the unit to cool down before
proceeding.
2. Remove the drawer and water tray.
3. Carefully turn unit over and remove the base
plate (3).
4. Disconnect wires from rocker switch (8) and pull
switch from unit..
5. Reverse steps 2-4 to install replacement switch.
HEATER ELEMENT REPLACEMENT
1. Turn off rocker switch (power on/off), unplug the
power cord and allow the unit to cool down before
proceeding.
2. Remove the drawer and water tray.
3. Carefully turn unit over and remove the base
plate (3).
4. Disconnect wires from the heating element (12).
5. Carefully turn unit right side up.
6. Remove screws from heater retainer bracket.
Remove tube clips (22) securing element to cabi-
net side.
7. Reverse steps 2-6 to install replacement element.
MAINTENANCE (continued)
