Antunes UTX-200, Manual

Page: 10 / 16

UNIVERSAL TOASTER UTX-200
10
P/N 1010904 Rev. 4 11/18/05
McDonald’s
OPERATION (continued)
Light Buns Dark
PRGM
MOTOR
PLTN
UT
I/R
NEXT PREV SELECT
BREAKFAST/LUNCH
ADJUST
Figure 14. Adjusting Toasting Quality
Adjusting Toasting Quality
The toasting quality of the UTX-200 can be adjusted to
provide a lighter or more darkly toasted product. Follow
these steps to adjust toasting quality.
1. Open the Front Cover to access the Control Panel
(Figure 1).
2. Press and release the ADJ button (Figure 14)
3. Use the PREV and NEXT buttons to adjust the
toasting quality to darker or lighter (Figure 14).
NOTE: Pressing the NEXT button increases toast-
ing darkness. Pressing the PREV button decreases
toasting darkness.
4. Test one or two buns to verify that the product is
toasting at the desired quality
5. If the toasting quality needs further adjustment,
repeat Steps 2 through 4 as necessary.
6. This setting returns to the default factory setting
once the unit is powered off. Repeat Steps 1
through 5 to readjust toasting quality if necessary.
Viewing the Program Mode Settings
There are two levels of program information in the UTX-
200 that can be viewed.
VIEWING LEVEL ONE PROGRAM INFORMATION
The level one program information includes the follow-
ing three settings:
• Platen operation settings
• Temperature settings
• Language Settings (only English is available at this
time).
Follow these steps to view these settings:
1. From any operation mode (
Bagel Ready
,
Muffin Ready
, or
Lunch Ready
) open the Front
Cover and press and hold the PRGM button for 2
- 3 seconds.
2. The following appears on the display:
Platen Mode
Press
 or  or Select
3. Use the Next or Prev button to scroll through the
categories:
•
Platen Mode
(default setting is
Lunch Only
)
•
Units (F/C)
(default setting is
F
)
•
Language
(default setting is
English
)
NOTE: The unit will exit the Program Mode after 10
seconds of inactivity.
4. When the desired category is reached, press the
Select button ONCE to view the setting for that
category.
NOTE: The current setting will be the FIRST setting
shown in the display.
WARNING
Do NOT press the Next or Prev buttons at this
time. This may change the default settings and
affect the normal operation of the unit!
5. Press the Select button to return to the Category
view. You can then scroll to a different category
with the Next or Prev buttons and use the Select
button to view the setting for that category.
6. When you are finished viewing settings, press the
Select button until the Operation Mode (
Bagel
Ready
,
Muffin Ready
, or
Lunch Ready)
screen appears.