®
P/N 1011582 Rev. F 07/21
11
Weekly
Clean Cycle Maintenance
The cleaning cycle can be accessed and
performed at any time during the day.
When low mineral content (low TDS) water
is used with the steamer, the clean cycle
should only be needed monthly. Higher
mineral content water may require more
frequent clean cycles.
NOTE:
Failure to properly clean and
de-scale boiler will cause
significant changes in operation
of steamer. Antunes is not
responsible for any damage or
complications due to negligent
maintenance of steamer.
1.
Select
Settings
. The Settings Menu
screen opens.
Settings Menu
Done
Set
Clock
Edit
Wakeup
Clean
Boiler
Service
Menu
2.
Select
Clean Boiler
to begin the
Clean Cycle.
Close Drawer(s) And
Add Descaler
OK
Cancel
3.
Remove the Cycle Key and insert it
into the Cleaning Cartridge (
Figure
9
). Rotate cartridge counter-clockwise
and remove from steamer.
4.
Remove top of Cleaning Cartridge by
pulling top off the plastic housing.
5.
Pour 4oz of cleaning solution into the
plastic housing (Figure 10).
NOTE:
Use two 2oz Delimer Packets in
Cleaning Cartridge per Clean
Cycle.
Figure 9. Clean Cycle
Rotate the door down and remove key
from pocket. Insert key into clean cycle
cartridge, counter clockwise, and remove
from steamer.
Remove top of cartridge by pulling it off
the plastic housing.
Figure 10. Pour Delimer into Cleaning
Cartridge
6.
Reattach top of Cleaning Cartridge.
7.
Place Cleaning Cartridge back into
steamer.
8.
Rotate the supplied key clockwise
to tighten cartridge. Steamer is now
ready to perform Clean Cycle.
9.
Press
OK
to begin the cleaning cycle.
The following screen appears and
begins the cleaning cycle.
CLEANING
Clean Fill
Temp 119
Hi Probe DRY
Lo Probe DRY
Snap Switch COLD
Pressure Switch COLD
Time 00:04:54
Step 1 of 2
10.
When the Cleaning Cycle is complete,
the following screen appears. Press
OK
to return to the Tools Menu.
Cleaning Completed
Press OK
OK
