161
161
161
161
161
161
161
161
161
161
161
161
161
161
161
161
07. OPTION 5: JACK LIGHTS
If you want to add illumination to the jacks, add the fol-
lowing componets (add components from the buffered
mult option: 01, 02, 07). This can be done even if you want
a passive multiple, though like this it’ll draw a consider-
able amount of current from the +12 rail.
00. Orient the PCB as seen on the left.
01. Solder the four 160R resistors.
02. Solder the 16x SMD LEDs
Orientation matters! The markings should face the
Ű lines on the PCB.
03. Solder 1x2 pin header and add jumper.
04. Bridge the four solder jumpers.
00
01
02
04
03
