Antti-Teollisuus Oy
13
408099 11-2020
Blower units and axial blowers
22
,5°
77
0
810
680
7
10
120
12
22,
5°
77
0
508
810
7
10
120
12
17,2 kW
8,66 kW
A75893
A75893
PRESENTATION OF 17,2 kW and 8,66 kW AXIAL BLOWERS
The blowers are available in two different sizes. Those are equipped with either a 17.2 kW or a 8.66 kW motor.
The blower shall be installed outside the dryer, inside the air channel.
The motors are by one size smaller than stated in the nameplate, but the given output, however, is correct. Run-
ning at a greater load is possible, provided that the cooling effect is sufficient.
- The delivery of the axial blower includes a suction bell, to be installed as shown in the drawing, taking note of
the installation practice applied.
- Also a fire thermostat is delivered with the blower. There are installation points for both the fire thermostat and
the outlet temperature sensor in the blower frame.
114552
AXIAL BLOWER, 1-STAGE*** 17,2 kW ø710 mm 108kg
114554
AXIAL BLOWER, 1-STAGE *** 8,66 kW ø710 mm 75 kg
