manualshive.com logo in svg

ANTONUS STEP BROTHER, User Manual

Share
Download
ANTONUS STEP BROTHER User Manual Download Page 5

4

If you are reading this manual is because you have bought 

a 

Step Brother, which I want to thank, but you can also to be 

reading this just for the interest or curiosity in the instru-
ment, in that case also thank too, more in today times where 
the sequencers catalogue is so large and varied.

In this manual I will try to explain and show what you can 

start to create with Step Brother, and I say “start” because the 
idea of   the 

Step Brother is to be more than just a simple ana-

log sequencer and it would be almost impossible to describe 
in this manual all the creative possibilities that will be given 
when the Step Brother starts to interact with voltage contro-
lled modular systems.

I don’t pretend it will be a simple guide with only defini-

tion of terms and collection of adjustments. First I want reader 
understand a little of the “why” of this instrument, from its 
first idea and concept. I also want, while we are explaining the 
concepts of the Step Brother, that illustrations and practical 
examples help to the instrument understanding while reading 
this manual.

 Toni 

Gutiérrez

Introduction

Summary of Contents for STEP BROTHER












































Reviews:

No comments

Brands by name

Popular brands

Load more brands