PS-45
ANTIGRAVITY BATTERIES
//
310 527 2330
//
Page 4 of 6
USER MANUAL
CHARGING THE PS-45
On the front panel of the PS45 is an “INPUT” Port. This is where you can charge the PS45 by the Provided AC Wall
Charger, or by using our optional Antigravity Batteries Solar Panels or other compatible solar panels.
For AC Charging simply plug in the Wall charger to a 110v Receptical and plug the Charging Tip into the Input Port
located on the Front Panel of the PS45. ONLY USE THE PROVIDED AC CHARGER. DO NOT USE ANY OTHER!
For Solar Charging simply plug the Charging Tip from the Solar Panel into the Input Port (5.5mm size) of PS45.
The Blue LED Capacity lights will flash when charging. As the battery charge level increases, each succesive LED
will light up. When battery is fully charged all 4 LEDs stop flashing and will be fully lit.
1)
2)
TURNING ON THE LED LIGHT
To turn on the Flashlight, press the button on the rear of the unit next to the light. The first press will turn on the
light and be a solid light, second press will be a “fast flashing” light, third press will be a “slow flashing” light, and
fourth press will turn off the flashlight.
LED INDICATOR LIGHTS
STATUS DESCRIPTION
All 4 Blue LED lights ON
Fully Charged
Blue LED lights flashing
Charging in progress
Blue LED lights are always on
Charging is completed
Green LED light is always on
AC Power is ON. Remember to turn Off when
AC power is not in use. Substantial battery
drain will occur.
LED BUTTON
BACK
LED LIGHT
