Important Safety Notice
Thank you for purchasing this Antiference HDMI distribution product.
Please read the following instructions carefully and retain for future
reference.
1. Please pay careful attention to the following safety considerations:
2. Do not place any items on the device
3. Ensure no liquids are on or near the device as splashes may damage the
unit
4. For cleaning, use a damp cloth only without solvents
5. Do not attempt to open the case as there is a danger of electric shock
6. Repairs should be carried out by a qualified technician
7. Place the unit in a well ventilated area to prevent overheating
8. Carry out the installation before connecting the device to a source of power
9. Use only the supplied power supply as 3rd party products may damage the
product
Introduction
This Antiference HDMI device splits and extends an HDMI source to 8 points
over single CAT6 cables up to 40m away. Also included is an HDMI loop through
for a local set or to loop the signal into another part of the system such as an
Antiference HDMI modulator.
This splitter supports resolutions up to 1920x1080@60Hz and IR control is
also included allowing the user to control the source device from the remote
location(s)
EDID control is also featured offering a completely flexible solution and the
receiver units are POE meaning no power is required at the TV point. The main
splitter unit provides the power for the entire system.
Compatible with SKY HD & SKY Q (Q only at 1080p) and Blu Ray, Apple TV or
CCTV applications etc.
