Rear Panel
The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power
from 100 to 240V AC, 50/60HZ.
Power socket
Connect the female connector of the power cord here, and the male connector to the AC (Alternat-
ing Current) power outlet. Please make sure the voltage of the power supply meets the require-
ment of the input voltage
Grounding column
The switch already comes with lightning protection mechanism. You can also ground the switch
through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
INSTALLATION OF THE SWITCH
This part describes how to install your Ethernet Switch and make connections to it. Please follow
the following instructions to avoid incorrect installation causing device damage and security threat.
●
Before cleaning the switch, unplug the power plug of the switch first. Do not clean
the switch with wet cloth or liquid;
●
Do not place the switch near water or any damp area. Prevent water or moisture
from entering the switch chassis;
●
Do not place the switch on an unstable case or desk. The switch might be damaged
severely in case of a fall;
●
Ensure proper ventilation of the equipment room and keep the ventilation vents of
the switch free of obstruction;
●
Make sure that the operating voltage is the same one labeled on the switch;
●
Do not open the chassis while the switch is operating or when electrical hazards are
present to avoid electrical shocks.
