HARDWARE DESCRIPTION
Front Panel
The Front Panel Consists of Ethernet Ports. The LED indicators are also located on the panel.
DIP Switch
The DIP switch is located on the left panel.
Default: the factory default mode, allows normal communication between ports 1-10.
VLAN: Ports 1-8 can be isolated to each other but Ports 1-8 can connect to Ports 9 & 10 after open
VLAN to stop broadcast Storm to increase forwarding rate of frame.
CCTV Up to 250m PoE distance allows you to expand you network via Ethernet cable to where
there is no power in or outlet but where you want to fix device such as IP Cameras.
Note: After change the mode, in order to make the corresponding configuration take effect you need
to manually restart
LED Indicator
LED
Color
Function
PWR
Green
Off: No Power supply.
Light: Indicates the switch has power.
LNK/ACT
Orange
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully
stablished at 10/100Mbps.
Blink: Indicates that the Switch is actively sending or
receiving data over that port.
Green
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully
established at 1000Mbps.
Blink: Indicates that the Switch is actively sending or
receiving data over that port.
PoE
Orange
Off: No PoE powered device (PD) connected.
Light: There is a PoE PD connected to be port, which
supply power successfully.
Blink: Indicates port abnormal power supply.
