Anthro
Corporation Technology Furniture
®
10450 SW Manhasset Drive Tualatin, Oregon 97062 1-800-325-3841
anthro.com
01–fit Adjusta Fixed Worksurface
Qty. 1 ....................... (see below)
30” Wide Fixed Worksurface
(FAJ30zz/xx3) ....100-6454-00
36” Wide Fixed Worksurface
(FAJ36zz/xx3) ....100-6455-00
48” Wide Fixed Worksurface
(FAJ48zz/xx3) ....100-6456-00
02–fit Adjusta Caddy Worksurface
Qty. 1 ....................... (see below)
30” Wide Caddy Worksurface
(FAJ30zz/xx3)..100-6458-00
36” Wide Caddy Worksurface
(FAJ36zz/xx3) ..100-6459-00
48” Wide Caddy Worksurface
(FAJ48zz/xx3) ..100-6460-00
03– fit Adjusta Mechanism
...............Qty. 1 ....................... (see below)
(The Adjusta Mechanism is packaged separately & requires assembly)
30” Wide Adjusta Mechanism (
FAJ30zz/xx3) ...225-5545-00
36” Wide Adjusta Mechanism
(FAJ36zz/xx3) ...225-5546-00
48” Wide Adjusta Mechanism
(FAJ48zz/xx3) ...225-5547-00
04– Small Support Bracket X
.............Qty. 1 ...................225-2014-00
05– 24.875” Vertical Legs
.................Qty. 4 ...................125-5230-00
06– Adjusta Base Tubes
......................Qty. 2 ..................125-5276-00
07– Cross Tubes
....................................Qty. 2 ....................... (see below)
30” Wide Cross Tube
(FAJ30zz/xx3) ...................125-5219-00
36” Wide Cross Tube
(FAJ36zz/xx3) ...................125-5220-00
48” Wide Cross Tube
(FAJ48zz/xx3) ...................125-5214-00
08– Insert Screws
.................................Qty. 4 ...................325-5052-00
09– 2.0” Large End Caps
...................Qty. 4 ...................175-5157-00
10– Caster Inserts
...............................Qty. 4 ...................525-5032-00
11– 3” Locking Casters
......................Qty. 2 ...................150-5053-00
12–
5
/
16
-18 fit Bolts
..............................Qty. 8 ...................325-5194-00
13– fit Tube Washers
.........................Qty. 8 ..
225-2050-00 or 225-3522-00
14– 3” Non-Locking Casters
...........Qty. 2 ...................150-5052-00
15–
3
/
4
” Wood Screws
........................Qty. 42 ................325-5106-00
16– Back Trough
....................................Qty. 1 ....................... (see below)
30” Wide Back Trough
(F3029zz/xx3) ................225-2290-00
36” Wide Back Trough
(F3629zz/xx3) ................225-2291-00
48” Wide Back Trough
(F4829zz/xx3) ................225-2292-00
17– Support Screws
............................Qty. 8 ...................325-5010-00
18– Small Support Bracket Y
............Qty. 1 ...................225-2015-00
19–
1
/
4
-20 Button Head Screws
......Qty. 4 ...................325-5003-00
20– 1.5” Small Caps
.............................Qty. 4 ...................175-5156-00
All Fastener quantities listed here are the minimum needed
for your Adjusta Unit assembly. There may be a few extra
Fasteners included, which are not counted in the Parts List.
Component list for part #’s FAJ30zz/xx3, FAJ36zz/xx3 & FAJ48zz/xx3
NOTE: Detailed views of all Hardware are provided with each Assembly Step.
05
07
08
03
02
10
12
06
01
09
13
14
15
16
17
20
11
18
04
19
19
Step 12
Align the Base Assembly on the Vertical Tubes as shown.
Secure the Base Assembly by inserting a fit Bolt through a
Tube Washer. Then insert the Bolt through the Base Tube
and carefully thread it into the Vertical Tubes.
Repeat for the remaining three Bolts and tighten all Bolts.
(
5
/
16
-18 X 3.5”) fit Bolt
325-5194-00
fit Tube Washer
225-2050-00 or 225-3522-00
Locking Casters
fit Bolt
fit Tube
Washer
1.5” Small
End Cap
Rotate Knobs
to adjust
Caddy angle.
Squeeze Paddle
to adjust Caddy height.
Step 13
Insert the four 1.5” Small End Caps into the Vertical Legs.
Congratulations!
Your assembly is complete.
Please return the enclosed Registration Card to receive
our product updates, new catalogs, and sale flyers.
Thank you for choosing Anthro!
Adjust the Caddy Worksurface height by:
1. Squeezing and holding the Paddle.
2. Reposition the Caddy to the desired location.
3. Release the Paddle.
Adjust the Caddy Worksurface angle by:
1. Rotating the Knobs counterclockwise.
2. Reposition the Caddy to the desired angle.
3. Rotate the Knobs clockwise.
