4
Questions? Call us at
800.325.3841
or visit
anthro.com
. We’re happy to walk you through the assembly!
STEP 4
Attach Cross Tubes to Base Tubes
¡
Position the Right Leg Assembly (from Step 2) with
two Cross Tubes as shown. Insert one Cap Screw with a
Curved Washer through a side hole, carefully threading
the Screw into the Cross Tube, but do not tighten all
the way. Repeat for the remaining three side holes.
¡
Once all cross tubes are installed, tighten all the
basetube screws. Leave the Wood Screws loose
until Step 6.
STEP 3
Attach Leg Assembly to Shelf
¡
Set the top of the cap screws into the recessed
holes in the shelf. Align the holes on the gusset with
pre-drilled holes on the shelf. Attach each leg with
four Wood Screws. Don’t tighten all the way.
1-1/4" Button Head Screw
325-5178-00
4" Cap Screw
325-5166-00
Cross Tube
STEP 2
Attach Gusset to Legs
¡
Attaching a gusset to a leg determines an outside and
inside for the leg. The flange on the side of the gusset
goes on the outside of the leg, and the cord goes on
the inside of the leg. Before attaching the gusset,
route the leg cord through the slot on the top of the
leg so the cord goes to the inside of the table. Using
the mallet, firmly attach the cord grommet to the slot.
¡
Align a gusset with a leg so that the screw holes on
the gusset match the threaded holes in the leg.
¡
Secure a gusset to a leg with four Socket Head Cap
Screws. Repeat for the other leg.
20mm Socket Head Cap Screw
325-5272-00
Shelf Gusset (X)
Shelf Gusset (Y)
Rear
Front
Front
Basetube Washer
225-2050-00 (Black)
225-3522-00 (Silver)
