Placing Your Strada 2's
If achieving maximum bass and warmth is your goal, the Strada 2’s should be placed near a
wall or other large surface.
The speakers can be mounted at any reasonable height. Point the Strada 2’s toward the
listening area to reduce floor and ceiling reflections. (Example: If seated at a desk, have the
Stradas on table stands and adjust the angle of the speakers until they are pointing directly
towards to your ears.) The left and right front speakers should be positioned so they are at
the opposite ends of the base of a triangle whose tip is at the listening area (Figure 2).
Note:
Strada 2's can be mounted on floor stands, table stands or wall mounts. They are
also very effective near field speakers and sound superb on a desktop or in home office.
They can even be placed in a cubbyhole or wall unit without significant degradation in
sound quality. (When placed in a cubby or wall unit it is important to position the speaker
as close as possible to the opening of the enclosure. This will minimize reflections and
increase accuracy) Refer to page 8 for additional information concerning these mounting
alternatives.
An example of a stereo (2.0 configuration) setup using two floor-mounted Strada 2’s is
shown in Figure 2.
3
Reference Strada 2
Main Loudspeaker
Reference Strada 2
Main Loudspeaker
Figure 2. Example of a Stereo (2.0 Configuration) Setup
Summary of Contents for Reference Strada 2
Page 18: ...14 blank...
