Additional Items Required for Installation
The following additional items are required when installing your Strada 2’s and connecting
them to your home theater system
Item Description
Mounting Hardware
A floor mount, table stand, or a wall mount can
be used for mounting your Strada 2’s. These can
be obtained from your Anthony Gallo Acoustics
dealer.
Connecting Wire
Ask your Anthony Gallo Acoustics dealer for wire
recommendations or contact us for suggestions.
Adjustable Wrench
A small adjustable wrench could be used to
gently tighten the speaker connections but usually a
firm twist of the wrist will suffice but occasionally go
back and check to see if these connections have
loosened over time.
Mounting Your Strada 2’s
Your Strada 2’s can be used with a
floor stand
, a
table stand
, or a
wall mount
(Figure 5).
Separate instructions are provided for assembling the mounting hardware and attaching it
to the rear of your Strada 2’s.
Note:
If you purchased a floor stand, table stand, or a wall mount for your Strada 2,
these will each be packaged in a sparate carton. Installations for assembling and
installing these items are included in their carton.
When you initially install your Strada 2’s, you will likely change the location and/or position
of one or more of the speakers before you find that the speaker locations and positions
are optimal for the particular size, geometry, and construction of your home theater and
the listening area. Also, the speakers require a break-in period of approximately 100-150
hours to develop their full sound potential.
8
Summary of Contents for Reference Strada 2
Page 18: ...14 blank...
