Anthem MDX Crestron
Module
Feedback Signals
TCP_Connect
[digital]
This signal will go high when the enable is set high and TCP is the selected connection type.
This signal is designed to be attached to the TCP/IP Client symbol on the Connect input.
PowerFB[1-8]
[digital]
This signal will go high to indicate the matching zone is powered on and low when the
matching zone if powered off. The signals from 5 - 8 are designed to be commented out if
you are using the MDX-8.
MuteFB[1-8]
[digital]
This signal will be high when the mute is active for the matching zone, low when the
matching zone is inactive. The signals from 5 - 8 are designed to be commented out if you
are using the MDX-8.
FanSpeed
[analog]
This signal will provide the current fan speed in RPM.
DeviceName$
[string]
This signal outputs the device name of the connected MDX device.
SerialNumber
[string]
This signal indicates serial number of the connected MDX device.
BuildDate
[string]
This signal indicates the current build date of the connected MDX device.
Model
[string]
This signal indicates the date of the current model of the connected MDX device.
Version
[string]
This signal indicates the firmware version of the connected MDX device..
7
