Anthem MDX Crestron
Module
ZoneSource[1-8]
[analog]
This signal changes the current input for the selected zone. The possible values are as
follows
Value
Input Format
0
No Input
1
Analog Input 1
2
Analog Input 2
3
Analog Input 3
4
Analog Input 4
5
Analog Input 5 (ignored on the MDX-8)
6
Analog Input 6 (ignored on the MDX-8)
7
Analog Input 7 (ignored on the MDX-8)
8
Analog Input 8 (ignored on the MDX-8)
9
Digital Input 1 (ignored on the MDX-8)
10
Digital Input 2 (ignored on the MDX-8)
11
Digital Input 3 (ignored on the MDX-8)
12
Digital Input 4 (ignored on the MDX-8)
ZoneVolume[1-8]
[analog]
This signal can be set from 0 to 100% to set the matching volume.
Rx$
[string]
The data from the IP or RS-232 connection to the amp should be connected here.
6
