Anthem LTX 300v, Instructions Manual

Page: 37 / 174

ENGLISH
37
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Installation > Screen Adjust
25
Screen Adjust
Corrects skewed white balance derived from the reflective characteristics of the screen.
Off Makes no correction. (Normally set to “off”)
A Corrects to slightly reddish.
B Corrects to slightly greenish.
C Corrects to slightly bluish.
Display Setup > Back Color
26
Back Color
Configures the screen color displayed when there is no input signal.
Blue Sets screen color to “Blue”.
Black Sets screen color to “Black”.
Display Setup > Menu Position
27
Menu Position
Sets the display position of the menu. The possible positions for displaying the menu are at the four corners or at center of
the screen.
Upper-left Upper-right Center Lower-right Lower-left
●
This can also be displayed by the remote control. ( P14 )
Display Setup > Menu Display
28
Menu Display
Sets the duration for displaying the menu.
15 sec Display for 15 seconds.
On Always display.
Display Setup > Line Display
29
Line Display
Sets whether to display the input setting when switching the input.
5 sec Display for 5 seconds.
Off Do not display.
Display Setup > Source Display
30
Source Display
Sets whether to display the source of input signals when changing the input.
On Display the source of input signals.
Off Do not display.