18
Example 1:
Select a Source for the ZONE2 Timer:
• Enter the Setup Menu. Go to ‘1. SET TIME/TIMERS’ and press
SELECT
.
• Press the
button until you reach ‘f. SET ZONE2 TIMERS’.
• Press
SELECT
. The ‘1f. SET ZONE2 TIMERS’ submenu will appear.
• Press the
button until you reach ‘e. SELECT SOURCE’.
• Use the
buttons to change to desired Source.
• Press
BACK
to leave this submenu and return to the SET TIME/TIMERS menu.
To have the Timer turn on to a Preset Station, do the following from the ‘e. SELECT SOURCE’ menu line:
• Use the
buttons to change to ‘Last Stn’.
• Press
SELECT
to highlight ‘Last Stn’.
• Use the
buttons to change to the desired FM • AM Preset. These will scroll from ‘AM 1-1’ to
‘AM 1-6’ then from ‘FM1-1’ to ‘FM3-6’ and back to ‘Last Stn’.
• Press
BACK
once you have selected a preset.
The Timer submenu setup procedure is the same for MAIN, ZONE2, and ZONE3.
Example 2:
Change ZONE2, TIMER2 to come on Weekdays at 7:35 AM.
• Enter the Setup Menu. Go to ‘1. SET TIME/TIMERS’ and press
SELECT
.
• Press the
button until you reach ‘f. SET ZONE2 TIMERS’.
• Press
SELECT
. The ‘1f. SET ZONE2 TIMERS’ submenu will appear.
• Press the
button to reach ‘TIMER 2: Off’.
• Use the
buttons to change to ‘Week’.
• Press the
button until you reach ‘a. T2 WEEKDAY ON: 8:00 AM’.
• Press
SELECT
. The hour is now in red, use the Master Control Knob or the
buttons to set the
hour to ‘7’ AM. (Continuing through ‘12’ will advance the AM/PM settings.)
• Press the
button. ‘00’ minutes will be highlighted.
• Use the Master Control Knob or the
buttons to set the minutes to ‘35’.
• Press
BACK
to leave this submenu and return to SET TIME/TIMERS menu.
When scrolling between ‘11 PM’ and ‘12 AM’ settings, the display shows ‘--:--’. Timers set in the ‘--:--’
position will be skipped. Thus, to set the Timer to only turn on, set the Off time to ‘--:--’. To set the Timer
to only turn off, set the On time to ‘--:--’.
3.
SETUP
MENU
continued …
