SXM-100 Commercial Satellite Audio Receiver
7
Connections
House the SXM-100 unit in a component rack or other suitable
location that provides adequate ventilation.
The maximum
ambient temperature should never exceed 120 degrees
Fahrenheit.
The unit’s front user interface and various
connectors on the back of the unit are shown here:
Connect the SXM-100 as follows:
1.
Audio output – audio connection may be made to either
the RCA outputs or
the 3.5mm output jack. These two
output connectors are internally wired in parallel, and it is
generally not recommended that both outputs be used
simultaneously unless it is known that both outputs drive a
high impedance load. The maximum level is 2VRMS.
2.
Power in – connect only the included AC adapter to a
suitable 120VAC power source.
3.
Antenna – connect an approved SiriusXM compatible
antenna (not supplied) to the RF input jack (F connector)
and position as described in the next section. Antenna and
cable kits are available from Antex and third party sources.
4.
RS232 – an RS232 control port is provided for optional
control of the SXM-100 unit from 3
rd
party control systems.
RF IN “F”
Connector to
Satellite Radio
antenna
RCA line level
audio out
3.5 mm line
level audio
out
RS232
control
port
DC power in