SXM-100 Commercial Satellite Audio Receiver
39
Press the MODE button on the front panel or the SETUP key on
the remote control. The display should read:
Enter your 4 digit passcode with the remote control. You
should now see:
Enter your new code using the remote control. If you press
any non numeric key on the remote control, the operation will
be aborted and you will return to the Change Code prompt.
After you enter the new passcode, you will be prompted to
confirm the new passcode by re-entering it.
Re-enter the same passcode again. Pressing any non numeric
key will abort the operation. If the passcode entered does not
match, you will receive a message:
After 2 seconds, you will be brought back to the Enter New
prompt. If the confirmation is successful, you will return to
the Change Code prompt.
PASSCODES
DON’T MATCH
CONFIRM NEW
CODE:____
ENTER NEW
CODE:____
ENTER
CODE:____