5
On a Wall:
1.
Drill two holes into the wall at the distance that fi ts
the antenna mounting holes, about 4¾ inches (120
mm) apart.
2.
Thread screws (not supplied) into each hole with the
heads extend about
¼ inch (6 mm)
from the wall.
3.
Place the antenna mounting holes over the screws.
On a Flat Surface:
Lay the antenna fl at, with the
rubber feet down, on a fl at surface
for multi-direction reception.
OR
Place the antenna in
the stand with the cable
management system facing
the back, and route the
antenna cable through the
notch.
