Antelope zenstudio+, Owner'S Manual

Page: 25 / 32

25
DAW
• What buffer size is your DAW set to?
If it is significantly low i.e. lower than 128 samples in your buffer size, try increasing it. Try
increasing the buffer size from the Zen control panel (Windows Only)
• Have you checked the input and output routing is correct in your DAW?
Is the Zen device selected in the relevant sound card section of the DAW’s preferences?
• If the Zen doesn’t show up in you DAW, first try unplugging and plugging back
the USB/Thunderbolt™ cable, then restarting your Computer and finally re-install the
firmware, drivers and control panel for the Zen .