Antelope zenstudio+, Owner'S Manual

Page: 10 / 32

10
6. Front, Rear and Side Panels Explained
6.1. Front Panel Explained
1. 2 Reamp outs
These outputs are direct outputs that should be used with guitar amplifiers for reamping.
2. 4 Instrument/ Mic Preamp/ Line Inputs
4 Class A mic preamps, with phantom power over Combo input with switchable line/ Hi-Z input.
3. Talkback Button
Press the talkback button to activate the talkback microphone. This can be distributed to the
selected headphones and/or monitors using the software control panel or the touchscreen.
4. Power button
Toggles standby/operation state. Clicking and holding for two seconds allows you to enter sub-
menu of the device.
• Mic Gain Control (rotary controls adjusts Mic Gain Clock Source)
• Sample Rate
• Volume Knob Control (allows you to select between three different monitoring outputs)
• Screensaver Time (allows you to change the time at which the screensaver becomes active)
• Device Info
• Factory Reset
5. Rotary control
Large stepped attenuator for headphone volume and main out volume. Clicking-in the large
volume control allows you to scroll between three different monitoring options: rear monitor
output; headphone output 1 and headphone output 2.
1 2 3 4 5
10 9
6 7 8