Antelope Orion32+, Owner'S Manual

Page: 12 / 28

10
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz. The current frequency is
indicated on the display (6) when adjusting.
6. Display
Multi-function display that shows Sample Rate on the left and volume levels for each
individual input levels on top meter, and output levels on lower meter. It displays 64
channels at a time that are software adjustable from the software control panel.
Note: Be aware that there might be a protective film over the display, which dims the
illumination – feel free to remove it.
7. Antelope button
Hold down the Antelope button to access the Control Menu of the device, which allows
you to adjust:
1. Clock Source
2. Peak Meter
3. Monitor Trim
4. Line Out Trim
5. Line In Trim
6. SR Conversion
7. S-MUX In
8. S-MUX Out
To scroll up and down, use the Frequency up/down buttons.
To enter each one of the sub-menus, press the Frequency down button.
To confirm a chosen setting, press and hold the Frequency down button.
Note:
To Restore Factory Defaults:
1. Unplug the power cable,
2. Hold down the Frequency Up and Down buttons, and plug the power cable back in.
8. Preset buttons (1-5)
Five Preset buttons store and recall your ‘favorite’ set-ups. For more information see
page 14, section 8 (Reference to Software Control Panel).
1. Save Preset
1. From Control Panel
1. Ctrl(Win) / Cmd(Mac) + Click on Preset Button
2. Ctrl + Number 1 to 5 from Keyboard
2. Recall Preset
1. Simply click on your choice of preset.